iVIZION Barcode Reader Ticket Orientation Function

iVIZION Barcode Reader Ticket Orientation Function

Hanry Anjo
13
Oct
2016

This TechBlog will help the user to change or 'flip' the orientation for the insertion of a barcode ticket, in order that it can be validated in the iVIZION note validator.  

On the iVIZION standard setup, it is set to read the TITO ticket barcode in the 'face up' position. If you wish to actually validate the ticket in the 'face down' orientation (as illustrated), we must modify the loom on the iVIZION.

JCM_Barcode_Ticket.png

​The image below shows the plug at the iVIZION end.

wire.jpg

The modification that needs to be done is to the yellow wire shown above. This is the wire that goes from Pin 24 to Pin 26.

Untitled.jpg

Once cut, the orientation of the barcode acceptance is 'flipped' through 180 degrees, allowing the iVIZION reader to validate TITO ticket barcodes in the 'face down' position.

To reverse the process, you must simply connect the wires together again.

SECTORS:
PRODUCTS:

Give Feedback